If your "стиральная машина AEG не отжимает" (AEG washing machine won't spin), it can leave your laundry soaking wet and disrupt your routine. Understanding the potential causes and solutions can help you address this issue effectively.

Common Reasons Why Your AEG Washing Machine Won’t Spin

1. Unbalanced Load: An uneven load can prevent the washing machine from spinning properly. When the laundry is not distributed evenly, the machine may detect this and stop spinning to prevent damage.


2. Blocked Drainage: If the drain pump or hose is blocked, water cannot drain out, and the machine won’t enter the spin cycle.


3. Faulty Door Lock: The machine won’t spin if the door isn’t securely locked. A faulty door lock mechanism can prevent the spin cycle from starting.


4. Motor Problems: Issues with the motor or motor brushes can cause the washing machine to stop spinning.


5. Control Board Issues: A malfunctioning control board can disrupt the machine's ability to enter the spin cycle.

Steps to Troubleshoot the Issue

1. Check the Load Balance:
   
   
   
   • Open the washing machine and redistribute the laundry evenly.
   
   
   • Ensure the machine is not overloaded. Remove some items if necessary and try spinning again.
   
   
   
   


2. Inspect the Drainage System:
   
   
   
   • Check the drain hose for any blockages or kinks.
   
   
   • Clean the drain filter, which is usually located at the bottom front of the machine.
   
   
   • Ensure that the drain pump is functioning properly. If it’s blocked or faulty, it may need cleaning or replacing.
   
   
   
   


3. Examine the Door Lock:
   
   
   
   • Ensure the door is fully closed and latched. https://aegsupport.ru/
   
   
   • Listen for the click of the door lock mechanism engaging when you close the door.
   
   
   • If the door lock is faulty, it may need to be repaired or replaced.
   
   
   
   


4. Check the Motor:
   
   
   
   • If the machine is still not spinning, the issue might be with the motor or motor brushes.
   
   
   • This requires a more in-depth inspection, and it’s best to call a professional technician for this.
   
   
   
   


5. Control Board Reset:
   
   
   
   • Sometimes, resetting the machine can solve the issue. Refer to your user manual for instructions on how to reset your specific model.
   
   
   
   

When to Call a Professional

If the above steps don’t resolve the issue, it’s time to call a professional. Certified technicians can accurately diagnose and fix complex issues with the motor or control board, ensuring your washing machine is safely and effectively repaired.

Conclusion

When your "стиральная машина AEG не отжимает," it can be a major inconvenience. By understanding the common causes and following these troubleshooting steps, you can often resolve the issue yourself. If the problem persists, professional repair services can help restore your washing machine’s functionality, keeping your laundry routine running smoothly. Regular maintenance and prompt attention to issues can prevent future problems and extend the lifespan of your appliance.